9 innovations to tackle water issues
On 5 June, delegates and Saur’s guests will be able to attend a presentation of the major innovations implemented by the Group to make drinking water and wastewater services even more efficient. This Pure Innovation showroom (see details below) has been set up within the Saumur CPO, the regional water “control tower” where 100 Saur experts work each day. This provides a fantastic way to round off the European Sustainable Development Week (ESDW).
Here’s 9 innovations made to tackle water issues :
Issue 1: protecting regions’ aquifers and boreholes
Developed by imaGeau (a Saur subsidiary), the EMI web solution anticipates risks linked to water production from groundwater (drought/scarcity, excessive exploitation of boreholes, environmental pollution, saltwater intrusion, etc.). EMI offers a map view of four key indicators: vulnerability to drought, yield reduction, quality criteria frequently observed in groundwater, and energy consumption. The principle of EMI is to enable a very in-depth analysis of aggregated data and provide an interpretation to guide the local authority’s response.
Issue 2: ensuring that water is safe
CarboPlus, a patented Saur process, removes micropollutants at a very low cost by adsorbing them using activated carbon. Neither concentrated nor transformed into toxic by-products, they are permanently removed from the water, without the risk of uncontrolled discharge. Used as a refining treatment, CarboPlus offers a proven response to the elimination of phytosanitary products (pesticides, weed killers, etc.) and medicinal residues (anti-epileptic drugs, hormones, anti-anxiety medication, etc.).
Issue 3: ensuring that water is sanitary
The Calcycle unit, the result of a technological partnership with the Dutch company Brabant Water, is installed upstream of the existing treatment system in order to obtain a final water hardness value of 25°F. Hard water does not pose a health risk, but causes problems in terms of the maintenance and durability of pipelines and fire hydrants and, for the consumer, premature wear to equipment, purchase of expensive maintenance products, higher energy consumption, risks of leakage, irritation of sensitive skin, etc.
Issue 4: coordinating the ongoing sanitation audit (collection, treatment and discharge)
With the Diag 20/20 solution, Saur offers a comprehensive risk management approach to meet the 2015 regulatory requirements. Its objectives include securing the functioning of the networks (parasitic water, overflows, H2S, corrosion or obstruction, etc.), monitoring the treatment quality of water treatment plants (pollutant loads, energy assessment, consumption of treatment products, management of sludge and by-products, unpleasant smells, etc.), protecting the natural environment (discharge quality, stormwater compliance, presence of micropollutants, crisis management, etc.).
Issue 5: optimising energy consumption and production from renewable resources
Making installations more energy efficient using artificial intelligence
Saur is designing and testing machine learning models in order to automate and simplify analysis of the operating data from its production facilities and make use of predictive models to conduct its operations more efficiently. To boost this commitment, Saur supplements its internal resources (data scientists, experts and operational staff) with an ecosystem of start-ups offering innovative solutions in the field of reduction in energy consumption and energy efficiency (Qualisteo, Energism, Metron, etc.).
Transforming sludge recovered from wastewater treatment plants into electricity
Saur has developed a sludge methanisation solution for large plants or combined with organic waste for smaller plants (co-digestion). Saur is harnessing the potential for organic waste recovery by designing a low-cost digester. The biogas produced is injected into the mains gas network.
Issue 6: digitising the customer relationship and offering new services
Saur is developing an enriched experience for the consumer across all channels, reinforced by proactive communications by email, SMS and social networks (meter reading date, scheduled work on the network, etc.). In parallel, Saur offers personalised and segmented services in real time, including control and monitoring of consumption, alerts in the event of overconsumption, etc.
Issue 7: managing water with predictive models
Saur uses machine learning algorithms, fed by a mass of historical data, which evaluate and configure themselves autonomously to minimise the average forecast error. For pipelines (material, past incidents, diameter, age, road traffic, etc.), the model learns from their “history” in order to associate certain combinations of conditions with a probability of major leaks in a chosen time interval. This allows renewals to be prioritised and improves the management efficiency of assets. The algorithms are also used to forecast volumes consumed or distributed, monitor water losses and optimise pumping.
Issue 8: improving the performance of drinking water systems and reducing leakage
Saur stands out for its network management policy, based on the combined implementation of technological innovations in permanent liaison with its CPO expertise. The Rézo+ expert solution is based on four key pillars: appraisal (establishment of a smart network and analyses by our experts), measurement (metering of distributed volumes and night flow-rates, listening to networks via technologies such as EAR2® from Saint-Lizaigne or Smartball® from Xylem), coordination (interpretation of data collected at the CPO for rapid decision-making), extending lifespan (prioritisation of investments in terms of maintenance and renewal). In addition to research on the ground, Saur is experimenting with aerial identification of leaks using satellite and drone images.
Issue 9: sharing information and tracking contract data in real time
Saur offers local authorities access to CPO Online, its interface for real-time monitoring of contract performance and operational and consumer data. CPO Online supplies and interprets key data, including volumes distributed, maintenance work, changes in the number of customer complaints, mapping, performance reporting, etc. It also helps local authorities to make investment decisions, following data analysis by our experts and cross-referencing it against external databases. This web interface, accessible 24 hours a day, is secure and can be customised according to the requirements of local authorities and technicians.